The cat climbing frame is a stylish pet item that gives cats a space to play. The multi-layered three-dimensional shape is more suitable for the nature of cats to climb. The uprights of the hemp rope can make cats sharpen their claws. Since the advent of the cat climbing frame, it has been supported and loved by the majority of cat friends. On this basis, various types of cats with different materials have been invented. Household items. If we want to do it ourselves, how do we make it? In addition to the above functions, is there any other function of the cat climbing frame?

The claws of cats are very powerful. Before they became pets, the claws were their sharp tools for catching prey. In order to better hunt cats, they would often sharpen their claws. Even though it is now a pet, the habit of grinding and scratching has not changed. Cat's claws can easily scratch furniture, floors, and walls. Therefore, cat owners will prepare cat scratching boards and cat climbing frames, and the main purpose is to prevent the damage caused by cat claws.

The function of the cat climbing frame is for the cat to scratch and climb to prevent the cat's claws from scratching the furniture floor. Training your pet cat to use a scratching board starts at an early age. It is not difficult to train a cat to use a cat climbing frame. The key is how to make your pet cat always like its cat climbing frame.

1. Materials and purchasing location:

1. Wood 28*24*1cm One piece, two pieces of 43*35*2cm (this should be easy to find)

2. PVC pipe, three pieces of 7.5cm in diameter and 44cm in length (you can buy this at a small store that sells building materials and hardware)

3. 60 meters of wool rope (it is best to buy more, this can be bought together in the store that buys PVC pipes, if you want better quality, you can go to a famous hemp rope store to buy, but The price is not cheap)

4. Brightly colored cloth (sold in any cloth shop)

5. The diameter is 7cm (as long as it can be stuffed into the PVC pipe) Yes), 6 round wooden blocks with a thickness of 7cm (2-3 blocks can be glued together if they are not so thick)

6. The sand should be about 10-20 pounds (see nearby Whoever is decorating, go to the point *^_^*)

7. 6 screws, preferably 5cm long.

8. 2 bottles of latex (can be bought together when selling PVC pipes)

2. Tools:

Open Hole drill, electric drill, nail gun, multi-purpose knife, screw driver

3. Production method:

1. Use a hole opener in 28*24*1cm Cut a hole 7.5cm in diameter and 0.5cm deep in one corner of the wooden board. Cut a hole with a diameter of 7.5cm and a depth of 1cm in each of the diagonal corners of a 43*35*2cm board (half the thickness of the board, do not penetrate it). Another 43*35*2cm board has the same hole as the previous one, but the hole is in the opposite direction. On the back of one of the 43*35*2cm boards, cut another 7.5cm, 1cm deep hole in different corners, and then cut a hole in the center of the board with a diameter that cats can drill through. Big hole.

2. Fill the two PVC pipes with sand first, use two 7cm-thick round wooden blocks to plug the two ends of the PVC pipes with glue, and use an electric drill to place the two ends of the PVC pipes. Punch a small hole for each (including the wood inside), drop latex into the small hole, and then stick one end of the rope into the small hole with a long and thin object such as a needle. Then put glue on the tube and start wrapping the rope (when wrapping the rope, pay special attention to the hands, my father's hand has 3 large bubbles, it is best to wear thread gloves), the rope must be wrapped tightly, or the cat will be Cats are easy to catch. When the rope is wrapped around the hole at the other end of the tube, use the above method to insert the end of the rope into the hole. Note that both ends of the PVC pipe are left as deep as the opening of the board when wrapping the rope, so that they can be inserted on the board later.